removed) Insert chip-side face upward, push inwards until spring retain.To remove: push SIM in slightly to release spring retain
3) Device Parameters
1.Real-time GPS, WIFI & CELL location
3.Calling (phone book, SOS call button, two way communication)
4.Voice Chat message
8.Heart rate & blood pressure
9.Medication reminders & Alarm Clock
10.Night Time power saving mode
12. Fall Alarm
13. Location Update modes
14. Other setting and functions: Histroical Track, GEO Fence
1. Location Update Schedule Modes
There are three location update modes. User can switch the working mode via mobile phone APP, Click „Settings‟ button top of App
/ Set „Location update schedule‟.
Normal mode: Updates location data to APP every 10 minutes when there is continuous movement
Power saving mode: Updates location data to APP every hour when there is continuous movement.
Sleep Mode: It is the default mode and simply means that Geo- fence (safe zone) and location updates are both turned off. The user can locate the GPS tracker at any time in this mode with the "Locate" button, this mode is the best way to save battery.
1.Under the above three modes, User can check device's current location in real time by APP. Open the APP in the map interface, click
on the locate button, and the GPS tracker will report the up-to-date position as soon as possible in a minute.
2.In the map you can see the type of positioning in different colors,WIFI positioning is orange, GPS positioning is blue, LBS positioning is purple
3.In the 10 minutes or 1 hour movement tracking mode, the GPS tracker will regularly update the location on the APP Map page and History
4.The device supports GPS tracking (Outdoor), WIFI tracking ( Outdoor and indoor), LBS tracking (Outdoor and indoor).
The primary difference between GPS and Wi-Fi locating technologies is in the method of gathering location data. GPS uses satellites that orbit around the Earth to triangulate a user's location, whereas Wi-Fi locating technology uses relative network signal strength gathered at network access points. GPS tracking is available in out-door but mostly not available for indoor. When the GPS tracker doesn‟t find GPS signal, it will use Wi-Fi or LBS tracking, Wi-Fi tracking is better for indoor comparing with LBS tracking.
2. The location history playback
In the main page of the APP, click the history button in the bottom, you can check the location history playback within the last three months.
3. Geo-fence (safe zone)
This feature defines a Geo-fence (safe zone) perimeter, and sends the user a push notification if the tracker has left or entered the safe zone.
The user can still manually locate the tracker when the safe zone is turned on/off.
Click More/Geofence/click the "+" icon in the bottom/input the zone name/Click and drag the map to set the centre point/click on the "+" "-" icon or drag to set the coordinates regional context/click OK in the upper right corner to save setting.
- App will show enter or leave geofence alarm information (History alarm information can be viewed in APP Information Centre, which is in the upper left corner of the map interface).
- The APP may not notify user immediately of a geofence breach - it will only check as often as the time interval is set, the GPS positioning time interval is shorter, the alarm information will be sent faster.
- User can set up to three Geo-fences.
Use phonebook to call: Click the address book icon in the GPS watch to view the contact list, slide up and down to select a contact to Call.
One key SOS: in case of emergency, long press the power button for 3 seconds to trigger the emergency call SOS. At this time, the GPS watch will call the 3 preset emergency numbers circularly, you can set cycle as once or twice, the default is one round SOS calling.
Call dialing: Click the dial icon in GPS watch, enter phone numbers manually, the telephone dial-out.
Note: Do not input special characters in phonebook, such as "-", "()" and so on.
5. Chat features:
From APP send to GPS watch: click voice in main page of APP, voice or short text messages can be sent to the watch.
From Watch send to APP: Click the voice icon in watch - holding down the talk button to speak - release your finger to complete the recording. In the voice talk screen, click on "+", user can take pictures and send photos to APP.
Note: Watch can receive a short text message sent by APP, but cannot send a text message from watch (only voice).
- Taking pictures remotely: APP more - remote camera - click the bottom bar to start.
- GPS Watch to take pictures: Click "camera" in GPS watch to enter the camera interface, click on the icon in the middle of the camera to take pictures. Click the lower left corner of the picture icon to enter the gallery page, you can view, delete pictures.
7. Health pedometer steps
Pedometer feature set: APP More à Healthy steps à Click on the Settings icon - Add pedometer period of time (up to three), and click
8. The heart rate- blood pressure
Wear the watch, click the „More‟ icon in GPS watch, Choose
„heartblood‟ pressure button to enter the measurement interface, click start, wait until circle completed - the results will be sent to APP.
Note: Please keep your body movement stopped while testing, sit down and still, otherwise the measurement will not be accurate. Make sure the heart rate sensor in the back side of the GPS watch is clean. Please note that not-clean-skin, hair in hands, tattoo, scar, low temperate environments, will affect the accuracy of the measurements.
User can learn more by APP à health à heart rate / blood pressure to view the history measurement.
9. Medication reminders
APP more à Settings à medication reminders à Set medication reminders and reminder time text, voice à to save.
Note: (1) user can set the frequency as single, daily and weekly
(2) Set up to three groups.
10. Sedentary reminder
Click the sedentary alert icon in the watch - choose to open - set a reminder interval - save.
11. Fall down alert
APP: APP More à Settings à fall alarm à to start alert by APP, user can also choose alerts by calling.GPS Watch: Moreà Settings à Fall alert setting à enable this feature and select tone ring when fall down alert is triggered.
user needs to set up SOS phone number at first.
The GPS watch needs to sense height, impact and angle etc. The height must above 0.5 meter, and angle change over 45 degrees. The authorized numbers will be alerted without the user pushing SOS button
when the fall sensor is activated. Due to the daily life activities (like some sports, sit back on a coach, etc.), sometimes device may detect a fall incorrectly with false alarm. However, users can manually cancel the fall alert by clicking cancel button in GPS watch screen during its beeping.
Please note: As there are some types of falls or fainting that will not be detected, we still strongly recommend user to push SOS button when fall down happen.
12. APN settings
The GPS watch by default has most of the APN information, however if you can call and receive SMS but cannot get the GPS watch online from the beginning of unboxing, then you need to set up APN. Ask your carrier about APN information, and set in the GPS watch. Or you can check your SIM card APN information by installing SIM card in a mobile phone, check APN in the network profile page in settings of mobile phone.
Use your mobile phone; send above SMS command to the GPS tracker SIM card. After you send the SMS command, please check if you get a set up success replied SMS from GPS locator.
We don't suggest to use M2M SIM card if you need to call to the GPS tracker. Please also make sure the traffic data package is available and not expired.
(Note: If the user name and password is null, you still need to keep the comma symbol as above)
APN will set successfully after you get the reply SMS from GPS locator, you are suggested to reboot GPS watch after APN settings.
Note: Each operator's APN information is different; please contact the operator for their APN and MCC, MNC information.